DVS Series
The DVS Series is a programmable Natural Convection Oven capable of six-pattern program operation. It combines PID temperature control with multiple safety and diagnostic functions, and a note on the product page cautions that placing heat-generating samples inside may prevent normal temperature control.
Manufacturer: Yamato — Japan
Overview
The DVS Series is a programmable Natural Convection Oven capable of six-pattern program operation. It combines PID temperature control with multiple safety and diagnostic functions, and a note on the product page cautions that placing heat-generating samples inside may prevent normal temperature control.
Program Patterns
The oven is equipped with six patterns of program controllers (30 steps ×1, 15 steps ×2, 10 steps ×3).
Sub-Functions
It is equipped with sub-functions such as overheating prevention temperature setting, calibration offset function, key lock function, and program repeat function.
Safety Measures
A self-diagnosis circuit checks for temperature sensor error, heater disconnection, memory error, internal communication error, temperature input circuit error, and SSR short circuit, alongside an overheating prevention device and overcurrent leakage breaker.
Common Specifications
| Specification | DVS Series |
|---|---|
| Method | Natural gravity convection |
| Operating temp. range | Room temp. +5 to 260°C |
| Temp. control accuracy | ±1°C (at 260°C) |
| Temp. distribution accuracy | ±5°C (at 260°C) |
| Max. temp. reaching time | Approx. 75 min. |
| Interior material | Stainless steel |
| Exterior material | Electrogalvanized steel sheet, paint |
| Heat insulating material | Glass wool |
| Heater | Stainless pipe heater, 1.2kW |
| Observation window | 250×280mm chemically strengthened glass ×3 |
| Cable hole | 30mm I.D. ×1 pcs. (right side) |
| Exhaust port | 30mm I.D. ×2 pcs. (on top) |
| Temp. controller | P.I.D. control |
| Temp. setting method | Digital setting method using the dedicated operation menu key and up/down key |
| Temp display method | Measurement temperature display: green LED digital display (resolution 1°C); Set temperature display: red LED digital display (resolution 1°C) |
| Timer | 0 minutes to 99 hours 59 minutes and 100 to 999 hours 50 minutes (timer weight function, ON/OFF possible) |
| Operation function | Fixed value operation, program operation, quick auto stop, auto stop, auto start, program auto start |
| Program mode | Program operation, 6 pattern selection (30 steps ×1, 15 steps ×2, 10 steps ×3), step weight function, step hold function, step skip function |
| Additional functions | Calibration offset function, key lock function, power failure recovery mode selection function, pattern repeat function |
| Heater circuit control | SSR drive |
| Sensor | K thermocouple (for temperature control, for independent overheating protector) |
| Safety device | Self-diagnosis function (temperature sensor abnormality, heater disconnection, SSR short circuit, memory abnormality, internal communication abnormality, temperature input circuit abnormality, automatic overheating prevention function), overheating prevention device, overcurrent leakage breaker |
| Shelf plate load | Approx. 15kg / pcs. |
| Shelf support step number / pitch | 9 steps / 30mm |
| Shelf plate / Shelf bracket | Stainless punching metal, 2 pcs. / 4 pcs. |
Model Comparison
| Specification | DVS403 | DVS603 |
|---|---|---|
| Internal dimensions (W×D×H mm) | 450×490×450mm | 600×540×500mm |
| External dimensions (W×D×H mm) | 560×601×820mm | 710×651×870mm |
| Power supply | Single phase AC100V 12.5A (breaker/power supply equipment capacity 15A) | Single phase AC100V 14A (breaker/power supply equipment capacity 15A) |
| Weight | 48kg | 63kg |